1.      Obada, D. O., Osseni, S. A., Sina, H., Oyedeji, A. N., Salami, K. A., Okafor, E., ... & Dauda, E. T. (2023). Hydroxyapatite materials-synthesis routes, mechanical behavior, theoretical insights, and artificial intelligence models: a review. Journal of the Australian Ceramic Society, 1-32.

2.      Osuchukwu, O. A., Salihi, A., Abdullahi, I., Etinosa, P. O., & Obada, D. O. (2023). A comparative study of the mechanical properties of sol-gel derived hydroxyapatite produced from a novel mixture of two natural biowastes for biomedical applications. Materials Chemistry and Physics, 297, 127434.

3.      Obada, D. O., Pama, M. Y., Samuel, E. T., Oyedeji, A. N., & Salami, K. A. (2023). Performance evaluation of a fabricated charcoal-fired oven for valorizing biowastes. MRS Advances, 1-6.

4.      Obada, D. O., Salami, K. A., Oyedeji, A. N., Ocheme, F. U., Okafor, C. A., Umaru, S., & Egbo, C. A. (2023). Physico-chemical and mechanical properties of coir-coconut husk reinforced LDPE composites: influence of long term acid ageing. Iranian Polymer Journal, 32(2), 115-123.

5.      Mouhamadou, S., Dalhatou, S., Obada, D. O., Fryda, L., Mahieu, A., Bonnet, P., ... & Zeghioud, H. (2023). Synthesis of piliostigma reticulatum decorated TiO2 based composite and its application towards Cr (VI) adsorption and bromophenol blue degradation: Nonlinear kinetics, equilibrium modelling and optimisation photocatalytic parameters. Journal of Environmental Chemical Engineering, 109273.

6.      Obada, D. O., Salami, K. A., Alabi, A. A., Oyedeji, A. N., Csaki, S., Hulan, T., & Meher, A. K. (2023). Mechanical behaviour of porous kaolin-based ceramics for potential catalysts support applications. Journal of the Korean Ceramic Society, 60(1), 99-112.

7.      Oyedeji, A. N., Obada, D. O., Dauda, M., Kuburi, L. S., Csaki, S., & Veverka, J. (2022). Fabrication and characterization of hydroxyapatite-strontium/polylactic acid composite for potential applications in bone regeneration. Polymer Bulletin, 1-18.

8.      Osuchukwu, O. A., Salihi, A., Abdullahi, I., & Obada, D. O. (2022). Taguchi grey relational optimization of sol–gel derived hydroxyapatite from a novel mix of two natural biowastes for biomedical applications. Scientific Reports, 12(1), 17968.

9.      Obada, D. O., Bako, R. B., Ahmed, A. S., Anafi, F. O., Eberemu, A. O., Dodoo-Arhin, D., ... & Obada, I. B. (2022). Teaching bioengineering using a blended online teaching and learning strategy: a new pedagogy for adapting classrooms in developing countries. Education and Information Technologies, 1-24.

10.      Obada, D. O., Kekung, M. O., & Anafi, F. O. (2022). The addition of Nigerian Kankara kaolin improves the ash properties of empty fruit bunches during combustion. MRS Advances, 7(28), 614-618.

11.      Salami, K. A., Obada, D. O., Alabi, A. A., Csaki, S., & Oyedeji, A. N. (2022). Utilization of sawdust as a pore-former in the fabrication of ceramic adsorbents for water purification. Journal of the Australian Ceramic Society, 58(4), 1297-1309.

12.      Dalhatou, S., Sali, M., Tetteh, S., Boubakari, A., Talami, B., Zeghioud, H., ... & Obada, D. O. (2022). Sorbent and Photocatalytic Potentials of Local Clays for the Removal of Organic Xenobiotic: Case of Crystal Violet. Catalysts, 12(8), 899.

13.      Obada, D. O., Aliyu, A., Kuta, U. M., Lisiyas, A., Ogenyi, V. F., Aquatar, M. O., ... & Adam, I. (2022). Trends in the development of hydroxyapatite from natural sources for biomedical applications. WIT Transactions on Ecology and the Environment, 257, 199-210.

14.      Osuchukwu, O. A., Salihi, A., Abdullahi, I., Obada, D. O., Abolade, S. A., Akande, A., & Csaki, S. (2022). Structural and nano-mechanical characteristics of a novel mixture of natural hydroxyapatite materials: Insights from ab-initio calculations and experiments. Materials Letters, 326, 132977.

15.      Osuchukwu, O. A., Salihi, A., Abdullahi, I., & Obada, D. O. (2022). Experimental data on the characterization of hydroxyapatite produced from a novel mixture of biowastes. Data in Brief, 42, 108305.

16.      Sowunmi, A. R., Anafi, F. O., Ajayi, O. A., Omisanya, N. O., Obada, D. O., Oyedeji, A. N., & Salami, K. A. (2022). Mixture optimization of synthesized zeolites 4A and 13X for solar adsorption refrigeration application. International Journal of Low-Carbon Technologies, 17, 1177-1185.

17.      Eberemu, A. O., Obada, D. O., Bako, R. B., Ahmed, A. S., Anafi, F. O., & Osinubi, K. J. (2022). Enhancing the Interest of Undergraduate Students in Geotechnical Engineering Using the CACPLA Pedagogy. In Geo-Congress 2022 (pp. 534-543).

18.      Obada, D. O., Osseni, S. A., Sina, H., Salami, K. A., Oyedeji, A. N., Dodoo-Arhin, D., ... & Dauda, E. T. (2021). Fabrication of novel kaolin-reinforced hydroxyapatite scaffolds with robust compressive strengths for bone regeneration. Applied Clay Science, 215, 106298.

19.      Obada, D. O., Salami, K. A., Oyedeji, A. N., Fasanya, O. O., Suleiman, M. U., Ibisola, B. A., ... & Dauda, E. T. (2021). Solution combustion synthesis of strontium-doped hydroxyapatite: effect of sintering and low compaction pressure on the mechanical properties and physiological stability. Materials Letters, 304, 130613.

20.      Akpan, E. S., Dauda, M., Kuburi, L. S., & Obada, D. O. (2021). Box-Behnken experimental design for the process optimization of catfish bones derived hydroxyapatite: A pedagogical approach. Materials Chemistry and Physics, 272, 124916.

21.      Obada, D. O., Dodoo-Arhin, D., Jimoh, A., Abdullahi, A., Bansod, N. D., Iorpenda, M. J., ... & Ochuokpa, E. O. (2021). The effect of acid aging on the mechanical and tribological properties of coir–coconut husk-reinforced low-density polyethylene composites. Polymer Bulletin, 78, 3489-3508.

22.      Obada, D. O., Adewumi, O. O., Yinka-Banjo, C., Bajeh, A., & Alli-Oke, R. (2021). Exploring the Constructive Alignment of Pedagogical Practices in Science and Engineering Education in Sub-Saharan African Universities: A Nigerian Case Study.

23.      Okafor, E., Obada, D. O., Ibrahim, Y., & Dodoo‐Arhin, D. (2021). Prediction of the reflection intensity of natural hydroxyapatite using generalized linear model and ensemble learning methods. Engineering Reports, 3(2), e12292.

24.      Akpan, E. S., Dauda, M., Kuburi, L. S., & Obada, D. O. (2021). Box-Behnken experimental design for the process optimization of catfish bones derived hydroxyapatite: A pedagogical approach. Materials Chemistry and Physics, 272, 124916.

25.      Obada, D. O., Dauda, E. T., Abifarin, J. K., Bansod, N. D., & Dodoo-Arhin, D. (2021). Mechanical measurements of pure and kaolin reinforced hydroxyapatite-derived scaffolds: A comparative study. Materials Today: Proceedings.

26.      Akpan, E. S., Dauda, M., Kuburi, L. S., Obada, D. O., Bansod, N. D., & Dodoo-Arhin, D. (2021). Hydroxyapatite ceramics prepared from two natural sources by direct thermal conversion: From material processing to mechanical measurements. Materials Today: Proceedings.

27.      Okafor, E., Obada, D. O., Ibrahim, Y., & Dodoo‐Arhin, D. (2021). Prediction of the reflection intensity of natural hydroxyapatite using generalized linear model and ensemble learning methods. Engineering Reports, e12292.

28.      Okafor, E., Obada, D. O., & Dodoo-Arhin, D. (2020). Ensemble learning prediction of transmittance at different wavenumbers in natural hydroxyapatite. Scientific African, 9, e00516.

29.      Obada, D. O., Dodoo-Arhin, D., Dauda, M., Anafi, F. O., Ahmed, A. S., Ajayi, O. A., ... & Momoh, O. J. (2020). Crack behaviour and mechanical properties of thermally treated kaolin-based ceramics: The influence of pore generating agents. Applied Clay Science, 194, 105698.

30.      Obada, D. O., Dodoo-Arhin, D., Jimoh, A., Abdullahi, A., Bansod, N. D., Iorpenda, M. J., ... & Ochuokpa, E. O. (2020). The effect of acid aging on the mechanical and tribological properties of coir–coconut husk-reinforced low-density polyethylene composites. Polymer Bulletin, 1-20.

31.      Marfo, K. K., Dodoo-Arhin, D., Agyei-Tuffou, B., Nyankson, E., Obada, D. O., Damoah, L. N., ... & Bediako, M. (2020). The physico-mechanical influence of dehydroxylized activated local kaolin: A supplementary cementitious material for construction applications. Case Studies in Construction Materials, 12, e00306.

32.      Dodoo-Arhin, D., Asiedu, T., Agyei-Tuffour, B., Nyankson, E., Obada, D., & Mwabora, J. M. (2020). Photocatalytic degradation of Rhodamine dyes using zinc oxide nanoparticles. Materials Today: Proceedings.

33.      Akpan, E. S., Dauda, M., Kuburi, L. S., Obada, D. O., & Dodoo-Arhin, D. (2020). A comparative study of the mechanical integrity of natural hydroxyapatite scaffolds prepared from two biogenic sources using a low compaction method. Results in Physics, 103051.

34.  Obada, D. O., Kuburi, L. S., Dauda, M., Umaru, S., Dodoo-Arhin, D., Balogun, M. B., ... & Iorpenda, M. J. (2020). Effect of variation in frequencies on the viscoelastic properties of coir and coconut husk powder reinforced polymer composites. Journal of King Saud University-Engineering Sciences, 32(2), 148-157.

35.  Akpana, E. S., Daudaa, M., Kuburia, L. S., & Obada, D. O. (2020). A facile synthesis method and fracture toughness evaluation of catfish bones-derived hydroxyapatite. MRS Advances, 5(26), 1357-1366.

36.  Commeh, M., Dodoo-Arhin, D., Acquaye, E., Baah, I. N., Amoatey, N. K., Ephraim, J. H., Obada, D.O., Minh, D.P., & Nzihou, A. (2020). Plastic Fuel Conversion and Characterisation: A Waste Valorization Potential for Ghana. MRS Advances, 1-8.

37.  Obada, D. O., Dauda, E. T., Abifarin, J. K., Dodoo-Arhin, D., & Bansod, N. D. (2020). Mechanical properties of natural hydroxyapatite using low cold compaction pressure: Effect of sintering temperature. Materials Chemistry and Physics, 239, 122099.

38.  Abifarin, J. K., Obada, D. O., Dauda, E. T., & Dodoo-Arhin, D. (2019). Experimental data on the characterization of hydroxyapatite synthesized from biowastes. Data in brief, 26, 104485.

39.  Amlabu, B. A., Umaru, S., Dauda, M., Obada, D. O., Csaki, S., Bansod, N. D., ... & Fasanya, O. O. (2019). Effect of Ball Milling Time on the Physical, Thermal and Fracture Behaviour of 2MgO. 2Al 2 O 3. 5SiO 2 Precursors. Silicon, 1-14.

40.  Obada, D. O., Kuburi, L. S., Dodoo-Arhin, D., Hou, Y., Balogun, M. B., & Muhammad, M. (2019). Dynamic Mechanical Behaviour of Coir and Coconut Husk Particulate Reinforced Polymer Composites: The Effect of Exposure to Acidic Environment. Intechopen.

41.  Obada, D. O., Kuburi, L. S., Dauda, M., Dodoo-Arhin, D., Iorpenda, M. J., Hou, Y., ... & Jimoh, A. A. (2019). Microstructural evolution and hardness properties of coir-coconut husk powder reinforced polymer composites subjected to an acidic environment. Procedia Manufacturing, 35, 737-742.

42.  Ogunkanmi, J. O., Kulla, D. M., Omisanya, N. O., Sumaila, M., Obada, D. O., & Dodoo-Arhin, D. (2018). Extraction of bio-oil during pyrolysis of locally sourced palm kernel shells: Effect of process parameters. Case studies in thermal engineering, 12, 711-716.

43.  Obada, D. O., Peter, M., Kulla, D. M., Omisanya, N. O., Atta, A. Y., & Dodoo-Arhin, D. (2018). Catalytic abatement of CO species from incomplete combustion of solid fuels used in domestic cooking. Heliyon, 4(8), e00748.

44.  Dodoo-Arhin, D., Buabeng, F. P., Mwabora, J. M., Amaniampong, P. N., Agbe, H., Nyankson, E., Obada, D.O. & Asiedu, N. Y. (2018). The effect of titanium dioxide synthesis technique and its photocatalytic degradation of organic dye pollutants. Heliyon, 4(7), e00681.

45.  Dodoo-Arhin, D., Nuamah, R. A., Jain, P. K., Obada, D. O., & Yaya, A. (2018). Nanostructured stannic oxide: Synthesis and characterisation for potential energy storage applications. Results in Physics, 9, 1391-1402.

46.  Balogun, M., Dambvo, L., Anafi, F.O., & Obada, D.O. (2018). Development, Evaluation and Soot Formation Characteristics of a Low -cost Pressurised Kerosene Stove. The Journal of the Association of Professional Engineers of Trinidad and Tobago, 46(1), 13-21.

47.  Sowunmi, A. R., Folayan, C. O., Anafi, F. O., Ajayi, O. A., Omisanya, N. O., Obada, D. O., & Dodoo-Arhin, D. (2018). Dataset on the comparison of synthesized and commercial zeolites for potential solar adsorption refrigerating system.

48.  Obada, D. O., Dodoo-Arhin, D., Dauda, M., Anafi, F. O., Ahmed, A. S., & Ajayi, O. A. (2017). Physico-mechanical and gas permeability characteristics of kaolin based ceramic membranes prepared with a new pore-forming agent. Applied Clay Science, 150, 175-183.

49.  Dodoo-Arhin, D., Nuamah, R. A., Agyei-Tuffour, B., Obada, D. O., & Yaya, A. (2017). Awaso bauxite red mud-cement based composites: Characterisation for pavement applications. Case studies in construction materials, 7, 45-55.

50.  Obada, D. O., Dodoo-Arhin, D., Dauda, M., Anafi, F. O., Ahmed, A. S., & Ajayi, O. A. (2017). Pressureless sintering and gas flux properties of porous ceramic membranes for gas applications. Results in physics, 7, 3838-3846.

51.  Obada, D. O., Dodoo-Arhin, D., Dauda, M., Anafi, F. O., Ahmed, A. S., & Ajayi, O. A. (2017). The impact of kaolin dehydroxylation on the porosity and mechanical integrity of kaolin-based ceramics using different pore formers. Results in physics, 7, 2718-2727.

52.  Iliyasu, I., Tanimu, I. K., & Obada, D. O. (2017). Preliminary Multidomain Modelling and Simulation Study of a Horizontal Axis Wind Turbine (Hawt) Tower Vibration. Nigerian Journal of Technology, 36(1), 127-131.

53.  Kuburi, L. S., Dauda, M., Obada, D. O., Umaru, S., Dodoo-Arhin, D., Iliyasu, I., ... & Mustapha, S. (2017). Effects of Coir Fibber Loading on the Physio-mechanical and Morphological Properties of Coconut Shell Powder Filled Low Density Polyethylene Composites.

54.  Obada, D. O., Dauda, M., Anafi, F. O., Ahmed, A. S., & Ajayi, O. A. (2016). Experimental investigation into the adherence of novel coating of auto-catalyst on cordierite supports. World Journal of Engineering.

55.  Obada, D. O., Dodoo-Arhin, D., Dauda, M., Anafi, F. O., Ahmed, A. S., & Ajayi, O. A. (2016). Potentials of fabricating porous ceramic bodies from kaolin for catalytic substrate applications. Applied Clay Science, 132, 194-204.

56.  Obada, D. O., Dodoo-Arhin, D., Dauda, M., Anafi, F. O., Ahmed, A. S., Ajayi, O. A., & Samotu, I. A. (2016). Effect of mechanical activation on mullite formation in an alumina-silica ceramics system at lower temperature. World Journal of Engineering.

57.  Obada, D. O., Dauda, M., & Dodoo-Arhin, D. (2016). Flame Temperature Characteristics and Flue Gas Analysis of an Improvised Biogas Burner. West Indian Journal of Engineering, 39(1).

58.  Obada, D. O., Dodoo-Arhin, D., Dauda, M., Anafi, F. O., Ahmed, A. S., Ajayi, O. A., & Samotu, I. A. (2016). Physical and Mechanical Properties of Porous Kaolin Based Ceramics at Different Sintering Temperatures. West Indian Journal of Engineering, 39(1).

59.  Dan-asabe, B., Yaro, A. S., Yawas, D. S., Aku, S. Y., Samotu, I. A., Abubakar, U., & Obada, D. O. (2016). Mechanical, Spectroscopic and Micro-structural Characterization of Banana Particulate Reinforced PVC Composite as Piping Material. Tribology in Industry, 38(2).

60.  Obot, M. U., Yawas, D. S., Aku, S. Y., & Obada, D. O. (2016). An Assessment on the Production of Abrasive Sandpaper from Locally Sourced Materials. Tribology in Industry, 38(2).

61.  Chukwu, M., Folayan, C. O., Pam, G. Y., & Obada, D. O. (2016). Characterization of some Nigerian coals for power generation. Journal of Combustion, 2016.

62.  Samotu, I. A., Dauda, M., Anafi, F. O., & Obada, D. O. (2015). Suitability of Recycled Polyethylene/Palm Kernel Shell-Iron Filings Composite for Automobile Application. Tribology in Industry, 37(2).

63.  Ibrahim, A. A., Dauda, M., Pam, G. Y., & Obada, D. O. (2015). Design, construction and performance comparison of two solar stills having different absorber design. Nigerian Journal of Technology, 34(4), 761-767.

64.  Anafia, F. O., Obada, D. O., & Obah, D. (2015). Development and Performance Evaluation of a Siphon Hand Pump. The Journal of the Association of Professional Engineers of Trinidad and Tobago, 43(2), 26-31

65.  Samotu, I.A., Anafi, M., Dauda, F.O., Ahmed, R.B., Bako, A.S., Obada, D.O. (2015). Modelling and finite element analysis of turning tables of micro-controller based versatile machine tools desktop learning module. World Journal of Engineering, 12(5), 489-498

66.  Anafi, F. O., Obada, D. O., & Samotu, I. A. (2015). Integrating Internet into Engineering Education: A Case Study of Students' usage and Attitudes in Faculty Of Engineering, Ahmadu Bello University. Bulgarian Journal of Science and Education Policy, 9(1), 129.

67.  Dauda, M., Kuburi, L. S., Obada, D. O., & Mustapha, R. I. (2015). Effects of Various Quenching Media on Mechanical Properties of Annealed 0.509 wt% C–0.178 wt% Mn Steel. Nigerian Journal of Technology, 34(3), 506-512.

68.  Momoh, O., Okafor, V., & Obada, D. (2015). Mathematical modeling of the solvent extraction of palm kernel oil from palm kernel. Palestine Technical University Research Journal, 3(1), 23-29

69.  Samotu, I. A., Bashar, D. A., Obada, D. O., & Reuben, B. (2015). A Preliminary Study on the Effect of Reinforcing Polyesters with Kenaf and Sisal Fibres on Their Mechanical Properties. West Indian Journal of Engineering, 38(1).

70.  Samotu, I. A., Dauda, M., Anafi, F. O., & Obada, D. O. (2015). Suitability of Recycled Polyethylene/Palm Kernel Shell-Iron Filings Composite for Automobile Application. Tribology in Industry, 37(2).

71.  Udo, O. M., & Obada, D. O. (2015). An Assessment of the Production of Ceramic Floor Tiles by Solid Slip Casting and Dry Pressing Method. AU Journal of Technology, 18(4).

72.  MomohBello, O. I., Daniel, O. I., Egwakhide, O. P., Obada, D. O., & Vincent, C. (2014). Development of a Manually Operated Guillotine Cutter. Palestine Technical University Research Journal.

73.  Kuburi, L. S., Obada, D. O., Samotu, I. A., Chira, C. V., Osuchukwu, O. A., & Jeremiah, M. (2014). Performance Characteristics of a Gasohol Fueled SI Engine. IOSR Journal of Engineering, 4(5), 36-41.

74.  Obada, D. O., Dauda, M., Anafi, O. F., Samotu, I. A., & Chira, C. V. (2014). Production of biogas and greenhouse implication of its combustion device. Advances in Applied Science Research, 5(2), 279-285.

75.  Obada, D. O., Lucas, E. B., Otegbayo, B. A., Orogun, T. I., Samotu, I. A., & Chira, C. V. Disrepair of Earth Moving Equipment: Causes and Remedies.

76.  Kuburi, L., Obada, D., Samotu, I., Jeremiah, M., & Kashim, Z. (2014). The impact of gasoline and synthesized ethanol blends on the emissions of a spark ignition engine. World Journal of Engineering.

77.  Okediran, B., Yawas, D., Samotu, I., Dagwa, I., & Obada, D. (2014). Effects of electrode type on the mechanical properties of weldments of some steel samples produced in Nigeria. World Journal of Engineering.

78.  Samotu, I., Dauda, M., Obada, D., & Alabi, A. A. (2014). Waste to wealth: A case study of empty water sachet conversion into composite material for automobile application. World Journal of Engineering, 11(3), 199-208.

79.  Obada, D. O., Obi, A. I., Dauda, M., & Anafi, F. O. (2014). Design and Construction of a Biogas Burner. Palestine Technical University Research Journal, 2(2), 35-42.

80.  Obada, D. O. (2012). Design, Construction and Performance Evaluation of a Biogas Burner (Doctoral dissertation).